JP4 is console 1 - GND 2 - TX 3 - ? 4 - RX (closest to JP4 marking) SysRq mappings ----------------- 2 - log level 3 5 - terminate all tasks 6 - log level 2 9 - trigger crash - - kill all tasks ! - power off # - nice all RT tasks % - Show memory * - log level 5 ) - SAK + - emergency thaw " - log level 7 ; - reset . - log level 4 > - log level 0 ESC - Keyboard mode set to system default CTL-Z - log level 9 CTL-/ - show regs CTL-Q - show blocked state CTL-W - show state CTL-Y - emergency sync CTL-U - emergency remount R/O CTL-] - show clockevent devices & pending hrtimers CTL-5 - timer list CTL-6 - log level 8 CTL-7 - show regs CTL-~ - log level 8 ----------------- RNC Caught Signal 15----------------- ----------------- OAMC Caught Signal 15----------------- [ 97.085149] sctp: sctp_addr_wq_mgmt add new entry for cmd:2 10.254.253.252 in wq 80523450 [ 97.095081] ch_notify on a closed smd_pkt_dev id:0 [ 97.095485] ch_notify on a closed smd_pkt_dev id:1 [ 97.584799] sctp: sctp_addrwq_timo_handler: the first ent in wq 80523450 is 10.254.253.252 for cmd 2 at entry 8f20a380 [ 99.041827] sctp: sctp_close(sk: 0x8f2d1a40, timeout:0) [ 99.041962] sctp: sctp_destroy_sock(sk: 8f2d1a40) [ 99.042139] sctp: sctp_close(sk: 0x8f2d1700, timeout:0) [ 99.042264] sctp: sctp_destroy_sock(sk: 8f2d1700) 5[ 99.194326] SysRq : Terminate All Tasks =[ 100.437538] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) FSM Application Bootloader version 1.26 (Node-H v2.06) Compiled options: DBL version: 12202013.00094447 SBL version: 12202013.00094506 main_c - Waiting for "booting" state Enable PMIC XO A0/A1 buffers UART DM configured for 115200 baud Initializing DDR Initializing FLASH FLASH device information FLASH ID: 0x1590aaef Card type: W29N02GZ Total blocks: 2048 Pages per block: 64 Bytes per page: 2048 Bad blocks search result Magic 1: 0xaa01de33 Magic 2: 0xdbfe99af Version: 0x00000001 Entries: 0 FLASH device information FLASH ID: 0x1590aaef Card type: W29N02GZ Total blocks: 2048 Pages per block: 64 Bytes per page: 2048 Bad block table found in FLASH at block 1 Bad block table in FLASH Magic 1: 0xaa01de33 Magic 2: 0xdbfe99af Version: 0x00000001 Entries: 0 No bad blocks found Performing hardware tests tests_all - Bypassing memory test tests_all - Bypassing CPU clock test tests_all - Bypassing cpu clock change test tests_all - Bypassing DDR clock change test fimage_init - Image type 0xB found at page/block 0x12C0(4800)/0x4B(75) fimage_init - Image type 0x5 found at page/block 0x13C0(5056)/0x4F(79) fimage_init - Image type 0xB found at page/block 0x1440(5184)/0x51(81) fimage_init - Image type 0x5 found at page/block 0x1540(5440)/0x55(85) fimage_init - Image type 0x2 found at page/block 0x18C0(6336)/0x63(99) fimage_init - Image type 0x12 found at page/block 0x44C0(17600)/0x113(275) fimage_init - Image type 0x2 found at page/block 0x5EC0(24256)/0x17B(379) fimage_init - Image type 0x12 found at page/block 0x8AC0(35520)/0x22B(555) FLASH device information FLASH ID: 0x1590aaef Card type: W29N02GZ Total blocks: 2048 Pages per block: 64 Bytes per page: 2048 Scanning UBI partition Boot mode: secured TrustStor key signature OK Trying system A... Group signature OK Kernel signature OK Rootfs signature OK Appfs signature OK Booting linux-A... Loading AMSS/QDSP from flash address 0x00c60000..... Starting Linux... [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.0 (nigel@poweredge) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 PREEMPT Thu Nov 5 15:06:22 GMT 2020 [ 0.000000] CPU: ARMv7 Processor [511f00f2] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache [ 0.000000] Machine: QCT FSM9XXX [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] socinfo_print: v4, id=94, ver=1.2, raw_id=1345, raw_ver=1345, hw_plat=2, hw_plat_ver=0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyDCC0 console=ttyMSM0,115200 mtdparts=msm_nand:0xADA0000@0x5260000(APPS2EFS),0x200000@0x760000(APPS_CAL),0x5260000@0(FULL_NAND) ubi.mtd=APPS2EFS root=/dev/mtdblock8 rootfstype=cramfs panic=1 msm_watchdog.reboot_bark_timeout=45 bootinfo=srA,ssA,bdO,trO,gaO,kaO,raO,aaO,gbU,kbU,rbU,abU,faU pubkey=b52e9ff28884838ba2f0c6fe9a2a05cc08e16fbcdd84c02f999c543a28b42e3886ca2a4bb38fdc55719ccfaad184b9fb [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 252712k/252712k available, 9432k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0x90800000 - 0xff000000 (1768 MB) [ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x804f3a48 (5039 kB) [ 0.000000] .init : 0x804f4000 - 0x80518000 ( 144 kB) [ 0.000000] .data : 0x80518000 - 0x80564e08 ( 308 kB) [ 0.000000] .bss : 0x80564e2c - 0x806f8694 (1615 kB) [ 0.000000] NR_IRQS:433 [ 0.000000] sched_clock: 32 bits at 4MHz, resolution 208ns, wraps every 894784ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000206] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.060037] pid_max: default: 32768 minimum: 301 [ 0.060220] Mount-cache hash table entries: 512 [ 0.060778] CPU: Testing write buffer coherency: ok [ 0.060978] hw perfevents: enabled with ARMv7 Scorpion PMU driver, 5 counters available [ 0.061075] Setting up static identity map for 0x1039f508 - 0x1039f548 [ 0.065484] dummy: [ 0.066052] NET: Registered protocol family 16 [ 0.066889] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.067516] gpiochip_add: registered GPIOs 0 to 31 on device: generic [ 0.067697] gpiochip_add: registered GPIOs 32 to 63 on device: generic [ 0.067863] gpiochip_add: registered GPIOs 64 to 95 on device: generic [ 0.068021] gpiochip_add: registered GPIOs 96 to 127 on device: generic [ 0.068195] gpiochip_add: registered GPIOs 128 to 159 on device: generic [ 0.068357] gpiochip_add: registered GPIOs 160 to 167 on device: generic [ 0.071548] pm8058_probe: PMIC revision: E3 [ 0.072347] gpiochip_add: registered GPIOs 168 to 207 on device: pm-gpio [ 0.072890] pm_gpio_probe: OK: base=168, ngpio=40 [ 0.073246] gpiochip_add: registered GPIOs 208 to 219 on device: pm8xxx-mpp [ 0.073344] pm8xxx_mpp_probe: OK: base=208, ngpio=12 [ 0.075883] pm8058_probe: failed to config shutdown on hard reset: -19 [ 0.078867] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.078884] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.080110] qup_i2c qup_i2c.3: No src_clk_rate specified in platfrom data [ 0.080594] qup_i2c qup_i2c.3: Using default clock rate 19200000Hz [ 0.104691] bio: create slab at 0 [ 0.105565] 8058_l3: 3000 mV standby [ 0.106016] 8058_l8: 2200 mV standby [ 0.106447] 8058_l9: 2050 mV standby [ 0.106878] 8058_l14: 2850 mV standby [ 0.107316] 8058_l15: 2200 mV standby [ 0.107778] 8058_l18: 2200 mV standby [ 0.108113] 8058_lvs0: 1800 mV [ 0.108564] 8058_s4: 1300 mV standby [ 0.109101] 8058_xo_a0: normal [ 0.109421] 8058_xo_a1: normal [ 0.110090] ION heap kmalloc created [ 0.112001] SCSI subsystem initialized [ 0.114690] Switching to clocksource dg_timer [ 0.128982] NET: Registered protocol family 2 [ 0.129209] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.129663] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.129874] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.129993] TCP: Hash tables configured (established 8192 bind 8192) [ 0.130004] TCP: reno registered [ 0.130016] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.130040] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.130302] NET: Registered protocol family 1 [ 0.130695] RPC: Registered named UNIX socket transport module. [ 0.130708] RPC: Registered udp transport module. [ 0.130717] RPC: Registered tcp transport module. [ 0.130726] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.131575] msm_smd_init: unable to create SMD logging context [ 0.131588] msm_smd_init: unable to create SMSM logging context [ 0.131888] Notify: smsm init [ 0.132406] msm_smem_init: unable to create logging context [ 0.133004] Partition(from smem) 0:EFS2APPS -- Offset:400 Size:400 [ 0.133017] smd_tty_log_init: Unable to create IPC log [ 0.135621] msm_ipc_router_init: Unable to create IPC logging for IPC RTR [ 0.135807] NET: Registered protocol family 27 [ 0.135818] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Req/Resp [ 0.135830] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Indications [ 0.136507] ACPU running at 883200 KHz [ 0.140651] fuse init (API version 7.18) [ 0.140987] msgmni has been set to 493 [ 0.141319] alg: No test for cipher_null (cipher_null-generic) [ 0.141421] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.141511] alg: No test for digest_null (digest_null-generic) [ 0.141601] alg: No test for compress_null (compress_null-generic) [ 0.144443] alg: No test for stdrng (krng) [ 0.144511] io scheduler noop registered [ 0.144586] io scheduler row registered (default) [ 0.145680] msm_serial: detected port #0 [ 0.145728] msm_serial.0: ttyMSM0 at MMIO 0x94000000 (irq = 133) is a MSM [ 0.145748] msm_serial: msm_init_clock() port #0 19.2 [ 0.145762] msm_serial: msm_set_baud_rate() port #0 rate 115200 [ 0.145774] msm_serial: console setup on port #0 [ 0.145787] msm_serial: msm_set_termios() port #0 baud 115200 [ 0.145798] msm_serial: msm_set_baud_rate() port #0 rate 115200 [ 0.747552] console [ttyMSM0] enabled [ 0.751178] msm_serial: detected port #1 [ 0.754978] msm_serial.1: ttyMSM1 at MMIO 0x94010000 (irq = 141) is a MSM [ 0.762013] msm_uim: detected port #2 [ 0.765367] msm_uim.2: ttyMSM2 at MMIO 0x94100000 (irq = 140) is a MSM [ 0.772107] msm_serial: driver initialized [ 0.777744] console [ttyDCC0] enabled [ 0.783672] brd: module loaded [ 0.788307] loop: module loaded [ 0.788755] 8058_l18: Failed to create debugfs directory [ 0.791321] 8058_lvs0: Failed to create debugfs directory [ 0.796810] qfp_fuse_probe: Fuse driver base:fa010000 end:fa018000 [ 0.804029] SCSI Media Changer driver v0.25 [ 0.808021] msm_nand_probe: phys addr 0x81600000 [ 0.811468] msm_nand_probe: dmac 0x7 [ 0.815187] msm_nand_probe: allocated dma buffer at 908a6000, dma_addr 1f9d6000 [ 0.822768] status: c00020 [ 0.825043] nandid: 1590aaef maker ef device aa [ 0.829518] ONFI probe : Found an ONFI compliant device W29N02GZ � [ 0.836664] Found a supported NAND device [ 0.840623] NAND Controller ID : 0x0 [ 0.844180] NAND Device ID : 0x1590aaef [ 0.848096] Buswidth : 8 Bits [ 0.851038] Density : 256 MByte [ 0.854248] Pagesize : 2048 Bytes [ 0.857552] Erasesize: 131072 Bytes [ 0.861019] Oobsize : 64 Bytes [ 0.864145] CFG0 Init : 0xa8d408c0 [ 0.867624] CFG1 Init : 0x0004745c [ 0.871089] ECCBUFCFG : 0x00000203 [ 0.874579] 3 cmdlinepart partitions found on MTD device msm_nand [ 0.880644] Creating 3 MTD partitions on "msm_nand": [ 0.885600] 0x000005260000-0x000010000000 : "APPS2EFS" [ 0.891892] 0x000000760000-0x000000960000 : "APPS_CAL" [ 0.896969] 0x000000000000-0x000005260000 : "FULL_NAND" [ 0.902756] UBI: attaching mtd0 to ubi0 [ 0.904991] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.911110] UBI: logical eraseblock size: 126976 bytes [ 0.916550] UBI: smallest flash I/O unit: 2048 [ 0.921180] UBI: VID header offset: 2048 (aligned 2048) [ 0.927185] UBI: data offset: 4096 [ 1.063532] [ 1.063539] SMSM: Modem SMSM state changed to SMSM_RESET. [ 1.063867] Notify: start reset FSM Application Bootloader version 1.26 (Node-H v2.06) Compiled options: DBL version: 12202013.00094447 SBL version: 12202013.00094506 main_c - Waiting for "booting" state Enable PMIC XO A0/A1 buffers UART DM configured for 115200 baud Initializing DDR Initializing FLASH FLASH device information FLASH ID: 0x1590aaef Card type: W29N02GZ Total blocks: 2048 Pages per block: 64 Bytes per page: 2048 Bad blocks search result Magic 1: 0xaa01de33 Magic 2: 0xdbfe99af Version: 0x00000001 Entries: 0 FLASH device information FLASH ID: 0x1590aaef Card type: W29N02GZ Total blocks: 2048 Pages per block: 64 Bytes per page: 2048 Bad block table found in FLASH at block 1 Bad block table in FLASH Magic 1: 0xaa01de33 Magic 2: 0xdbfe99af Version: 0x00000001 Entries: 0 No bad blocks found Performing hardware tests tests_all - Bypassing memory test tests_all - Bypassing CPU clock test tests_all - Bypassing cpu clock change test tests_all - Bypassing DDR clock change test fimage_init - Image type 0xB found at page/block 0x12C0(4800)/0x4B(75) fimage_init - Image type 0x5 found at page/block 0x13C0(5056)/0x4F(79) fimage_init - Image type 0xB found at page/block 0x1440(5184)/0x51(81) fimage_init - Image type 0x5 found at page/block 0x1540(5440)/0x55(85) fimage_init - Image type 0x2 found at page/block 0x18C0(6336)/0x63(99) fimage_init - Image type 0x12 found at page/block 0x44C0(17600)/0x113(275) fimage_init - Image type 0x2 found at page/block 0x5EC0(24256)/0x17B(379) fimage_init - Image type 0x12 found at page/block 0x8AC0(35520)/0x22B(555) FLASH device information FLASH ID: 0x1590aaef Card type: W29N02GZ Total blocks: 2048 Pages per block: 64 Bytes per page: 2048 Scanning UBI partition Boot mode: secured TrustStor key signature OK Trying system A... Group signature OK Kernel signature OK Rootfs signature OK Appfs signature OK Booting linux-A... Loading AMSS/QDSP from flash address 0x00c60000...... Starting Linux... [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.0 (nigel@poweredge) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 PREEMPT Thu Nov 5 15:06:22 GMT 2020 [ 0.000000] CPU: ARMv7 Processor [511f00f2] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache [ 0.000000] Machine: QCT FSM9XXX [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] socinfo_print: v4, id=94, ver=1.2, raw_id=1345, raw_ver=1345, hw_plat=2, hw_plat_ver=0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyDCC0 console=ttyMSM0,115200 mtdparts=msm_nand:0xADA0000@0x5260000(APPS2EFS),0x200000@0x760000(APPS_CAL),0x5260000@0(FULL_NAND) ubi.mtd=APPS2EFS root=/dev/mtdblock8 rootfstype=cramfs panic=1 msm_watchdog.reboot_bark_timeout=45 bootinfo=srA,ssA,bdO,trO,gaO,kaO,raO,aaO,gbU,kbU,rbU,abU,faU pubkey=b52e9ff28884838ba2f0c6fe9a2a05cc08e16fbcdd84c02f999c543a28b42e3886ca2a4bb38fdc55719ccfaad184b9fb [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 252712k/252712k available, 9432k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0x90800000 - 0xff000000 (1768 MB) [ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x804f3a48 (5039 kB) [ 0.000000] .init : 0x804f4000 - 0x80518000 ( 144 kB) [ 0.000000] .data : 0x80518000 - 0x80564e08 ( 308 kB) [ 0.000000] .bss : 0x80564e2c - 0x806f8694 (1615 kB) [ 0.000000] NR_IRQS:433 [ 0.000000] sched_clock: 32 bits at 4MHz, resolution 208ns, wraps every 894784ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000206] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.060038] pid_max: default: 32768 minimum: 301 [ 0.060221] Mount-cache hash table entries: 512 [ 0.060779] CPU: Testing write buffer coherency: ok [ 0.060976] hw perfevents: enabled with ARMv7 Scorpion PMU driver, 5 counters available [ 0.061075] Setting up static identity map for 0x1039f508 - 0x1039f548 [ 0.065508] dummy: [ 0.066076] NET: Registered protocol family 16 [ 0.066913] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.067542] gpiochip_add: registered GPIOs 0 to 31 on device: generic [ 0.067723] gpiochip_add: registered GPIOs 32 to 63 on device: generic [ 0.067886] gpiochip_add: registered GPIOs 64 to 95 on device: generic [ 0.068045] gpiochip_add: registered GPIOs 96 to 127 on device: generic [ 0.068219] gpiochip_add: registered GPIOs 128 to 159 on device: generic [ 0.068381] gpiochip_add: registered GPIOs 160 to 167 on device: generic [ 0.071560] pm8058_probe: PMIC revision: E3 [ 0.072358] gpiochip_add: registered GPIOs 168 to 207 on device: pm-gpio [ 0.072902] pm_gpio_probe: OK: base=168, ngpio=40 [ 0.073256] gpiochip_add: registered GPIOs 208 to 219 on device: pm8xxx-mpp [ 0.073355] pm8xxx_mpp_probe: OK: base=208, ngpio=12 [ 0.075885] pm8058_probe: failed to config shutdown on hard reset: -19 [ 0.078867] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.078884] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.080109] qup_i2c qup_i2c.3: No src_clk_rate specified in platfrom data [ 0.080593] qup_i2c qup_i2c.3: Using default clock rate 19200000Hz [ 0.104587] bio: create slab at 0 [ 0.105452] 8058_l3: 3000 mV standby [ 0.105901] 8058_l8: 2200 mV standby [ 0.106331] 8058_l9: 2050 mV standby [ 0.106763] 8058_l14: 2850 mV standby [ 0.107204] 8058_l15: 2200 mV standby [ 0.107660] 8058_l18: 2200 mV standby [ 0.107993] 8058_lvs0: 1800 mV [ 0.108441] 8058_s4: 1300 mV standby [ 0.108977] 8058_xo_a0: normal [ 0.109294] 8058_xo_a1: normal [ 0.109960] ION heap kmalloc created [ 0.111894] SCSI subsystem initialized [ 0.114586] Switching to clocksource dg_timer [ 0.128940] NET: Registered protocol family 2 [ 0.129164] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.129618] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.129828] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.129947] TCP: Hash tables configured (established 8192 bind 8192) [ 0.129958] TCP: reno registered [ 0.129970] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.129994] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.130260] NET: Registered protocol family 1 [ 0.130651] RPC: Registered named UNIX socket transport module. [ 0.130664] RPC: Registered udp transport module. [ 0.130673] RPC: Registered tcp transport module. [ 0.130682] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.131534] msm_smd_init: unable to create SMD logging context [ 0.131547] msm_smd_init: unable to create SMSM logging context [ 0.131845] Notify: smsm init [ 0.132363] msm_smem_init: unable to create logging context [ 0.132951] Partition(from smem) 0:EFS2APPS -- Offset:400 Size:400 [ 0.132964] smd_tty_log_init: Unable to create IPC log [ 0.135557] msm_ipc_router_init: Unable to create IPC logging for IPC RTR [ 0.135734] NET: Registered protocol family 27 [ 0.135745] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Req/Resp [ 0.135756] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Indications [ 0.136433] ACPU running at 883200 KHz [ 0.140568] fuse init (API version 7.18) [ 0.140902] msgmni has been set to 493 [ 0.141231] alg: No test for cipher_null (cipher_null-generic) [ 0.141333] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.141422] alg: No test for digest_null (digest_null-generic) [ 0.141512] alg: No test for compress_null (compress_null-generic) [ 0.144375] alg: No test for stdrng (krng) [ 0.144443] io scheduler noop registered [ 0.144516] io scheduler row registered (default) [ 0.145607] msm_serial: detected port #0 [ 0.145655] msm_serial.0: ttyMSM0 at MMIO 0x94000000 (irq = 133) is a MSM [ 0.145674] msm_serial: msm_init_clock() port #0 19.2 [ 0.145689] msm_serial: msm_set_baud_rate() port #0 rate 115200 [ 0.145700] msm_serial: console setup on port #0 [ 0.145714] msm_serial: msm_set_termios() port #0 baud 115200 [ 0.145724] msm_serial: msm_set_baud_rate() port #0 rate 115200 [ 0.747484] console [ttyMSM0] enabled [ 0.751105] msm_serial: detected port #1 [ 0.754908] msm_serial.1: ttyMSM1 at MMIO 0x94010000 (irq = 141) is a MSM [ 0.761945] msm_uim: detected port #2 [ 0.765290] msm_uim.2: ttyMSM2 at MMIO 0x94100000 (irq = 140) is a MSM [ 0.772034] msm_serial: driver initialized [ 0.777665] console [ttyDCC0] enabled [ 0.783591] brd: module loaded [ 0.788196] loop: module loaded [ 0.788640] 8058_l18: Failed to create debugfs directory [ 0.791249] 8058_lvs0: Failed to create debugfs directory [ 0.796730] qfp_fuse_probe: Fuse driver base:fa010000 end:fa018000 [ 0.803952] SCSI Media Changer driver v0.25 [ 0.807935] msm_nand_probe: phys addr 0x81600000 [ 0.811393] msm_nand_probe: dmac 0x7 [ 0.815111] msm_nand_probe: allocated dma buffer at 908a6000, dma_addr 1f9d6000 [ 0.823176] status: c03020 [ 0.824969] nandid: 1590aaef maker ef device aa [ 0.829447] ONFI probe : Found an ONFI compliant device W29N02GZ � [ 0.836592] Found a supported NAND device [ 0.840549] NAND Controller ID : 0x0 [ 0.844107] NAND Device ID : 0x1590aaef [ 0.848021] Buswidth : 8 Bits [ 0.850966] Density : 256 MByte [ 0.854175] Pagesize : 2048 Bytes [ 0.857479] Erasesize: 131072 Bytes [ 0.860947] Oobsize : 64 Bytes [ 0.864073] CFG0 Init : 0xa8d408c0 [ 0.867550] CFG1 Init : 0x0004745c [ 0.871017] ECCBUFCFG : 0x00000203 [ 0.874507] 3 cmdlinepart partitions found on MTD device msm_nand [ 0.880571] Creating 3 MTD partitions on "msm_nand": [ 0.885527] 0x000005260000-0x000010000000 : "APPS2EFS" [ 0.891822] 0x000000760000-0x000000960000 : "APPS_CAL" [ 0.896903] 0x000000000000-0x000005260000 : "FULL_NAND" [ 0.902682] UBI: attaching mtd0 to ubi0 [ 0.904915] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 0.911036] UBI: logical eraseblock size: 126976 bytes [ 0.916476] UBI: smallest flash I/O unit: 2048 [ 0.921107] UBI: VID header offset: 2048 (aligned 2048) [ 0.927112] UBI: data offset: 4096 [ 1.072026] [ 1.072034] SMSM: Modem SMSM state changed to SMSM_RESET. [ 1.072323] Notify: start reset [ 2.046756] UBI: max. sequence number: 29239 [ 2.060015] UBI: attached mtd0 to ubi0 [ 2.060117] UBI: MTD device name: "APPS2EFS" [ 2.060238] UBI: MTD device size: 173 MiB [ 2.060353] UBI: number of good PEBs: 1389 [ 2.060462] UBI: number of bad PEBs: 0 [ 2.060565] UBI: number of corrupted PEBs: 0 [ 2.060668] UBI: max. allowed volumes: 128 [ 2.060776] UBI: wear-leveling threshold: 4096 [ 2.060884] UBI: number of internal volumes: 1 [ 2.060988] UBI: number of user volumes: 15 [ 2.061169] UBI: available PEBs: 0 [ 2.065786] UBI: total number of reserved PEBs: 1389 [ 2.070553] UBI: number of PEBs reserved for bad PEB handling: 13 [ 2.076670] UBI: max/mean erase counter: 34/21 [ 2.081053] UBI: image sequence number: 1757194388 [ 2.085936] UBI: background thread "ubi_bgt0d" started, PID 509 [ 2.091842] UBI error: ubi_init: cannot attach mtd0 [ 2.122092] IMQ driver loaded successfully. (numdevs = 4, numqueues = 1) [ 2.122255] Hooking IMQ after NAT on PREROUTING. [ 2.122365] Hooking IMQ before NAT on POSTROUTING. [ 2.122494] tun: Universal TUN/TAP device driver, 1.6 [ 2.122611] tun: (C) 1999-2004 Max Krasnyansky [ 2.126625] PPP generic driver version 2.4.2 [ 2.130053] i2c /dev entries driver [ 2.133117] msm_adc successfully registered [ 2.136718] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 2.147292] cpuidle: using governor ladder [ 2.151386] cpuidle: using governor menu [ 2.156549] qcrypto qcrypto.0: Qualcomm Crypto 3e device found at 0x80e00000 [ 2.162714] qcrypto qcrypto.0: qcrypto-ecb-aes [ 2.166660] qcrypto qcrypto.0: qcrypto-cbc-aes [ 2.170971] qcrypto qcrypto.0: qcrypto-ctr-aes [ 2.175973] qcrypto qcrypto.0: qcrypto-ecb-des [ 2.179836] qcrypto qcrypto.0: qcrypto-cbc-des [ 2.184493] qcrypto qcrypto.0: qcrypto-ecb-3des [ 2.188803] qcrypto qcrypto.0: qcrypto-cbc-3des [ 2.193547] qcrypto qcrypto.0: qcrypto-sha1 [ 2.197644] qcrypto qcrypto.0: qcrypto-sha256 [ 2.201773] alg: No test for authenc(hmac(sha1),cbc(aes)) (qcrypto-aead-hmac-sha1-cbc-aes) [ 2.210008] qcrypto qcrypto.0: qcrypto-aead-hmac-sha1-cbc-aes [ 2.215774] alg: No test for authenc(hmac(sha1),cbc(des)) (qcrypto-aead-hmac-sha1-cbc-des) [ 2.223961] qcrypto qcrypto.0: qcrypto-aead-hmac-sha1-cbc-des [ 2.229729] alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (qcrypto-aead-hmac-sha1-cbc-3des) [ 2.238473] qcrypto qcrypto.0: qcrypto-aead-hmac-sha1-cbc-3des [ 2.244715] qcota qcota.0: Qualcomm Crypto 3e device found at 0x81000000 [ 2.252141] ashmem: initialized [ 2.254260] logger: created 256K log 'log_main' [ 2.258852] logger: created 256K log 'log_events' [ 2.263445] logger: created 256K log 'log_radio' [ 2.268063] logger: created 256K log 'log_system' [ 2.273028] u32 classifier [ 2.275307] Netfilter messages via NETLINK v0.30. [ 2.279939] nf_conntrack version 0.5.0 (3948 buckets, 15792 max) [ 2.286324] ctnetlink v0.93: registering with nfnetlink. [ 2.291661] TCP: cubic registered [ 2.294740] NET: Registered protocol family 10 [ 2.300692] Mobile IPv6 [ 2.301371] IPv6 over IPv4 tunneling driver [ 2.307349] NET: Registered protocol family 17 [ 2.310001] NET: Registere�[ 2.357066] msm_serial: msm_set_termios() port #0 baud 115200 [ 2.357200] msm_serial: msm_set_baud_rate() port #0 rate 115200 [ 2.367944] VFS: Mounted root (cramfs filesystem) readonly on device 31:8. [ 2.368480] Freeing init memory: 144K [ 2.772374] msm_serial: msm_set_termios() port #0 baud 115200 [ 2.772519] msm_serial: msm_set_baud_rate() port #0 rate 115200 ================================================================= Welcome to Qualcomm Root File System ================================================================= ---- Mounting proc file system ---- Mounting ramdisk with size 64M ---- Mounting sysfs ---- Creating dev nodes ---- Remounting /dev/root ---- Starting syslogd ---- Mounting debugfs ---- Mounting devpts ---- Creating loopback device Unit security level: secure Running out of bank A Signature check ok: unitdata No bank switch required ---- Configuring ACPU parameters ---- System time : Thu Jan 1 00:00:04 UTC 1970 ---- Minimum time: Tue Dec 31 17:53:57 UTC 2024 ---- System time : Tue Dec 31 17:53:57 UTC 2024 Board's MAC address is: PIC code hash: a36538387560baf08c212b2ecd0a7f55d97e57ea PIC current version: 89, file version 89 - PIC update not required eCryptfs checking took 0 seconds Build: 403-UmtsFolded, 5.0.0.27327 Provisioning type: CWMP Found CWMP DB WARNING: /unitdata/cert/hnb.key is missing Serial number: G1C8T006748 ---- Starting Monitor net.unix.max_dgram_qlen = 1000 ---- Starting FAP [ 17.550117] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W)